Phạm Lương
0942547456
| Thương hiệu |
| MODEL | LV5 | LV8 |
|---|---|---|
| TABLE | ||
| Table Size (mm) | 660x410 | 910x510 |
| Travel Rangers (X/Y/Z mm) | 510/410/510 | 810/510/510 |
| Max. Table Load (Kgs) | 200 | 300 |
| Spindle Nose to Table Surface (mm) | 100~610 | 100~610 |
| T-slot (Width x Distance x Number mm) | 14x125x3 | 14x125x4 |
| SPINDLE | *LV5/LV8 both are available | |
| Tool Shank & Pull Stud | ISO30 | ISO40 |
| Spindle Inner Diameter (mm) | 直結Ø45 | 直結Ø60 |
| Spindle Center to Column (mm) | 462 | 562 |
| Spindle Speed (rpm) Direct-Drive | 12000 (15000) | 12000 (15000) |
| Spindle Speed (rpm) Built-in | 24000 (36000/HSK-E40) | - |
| Draw Bar Force (Kgf) | 300 | 600 |
| Main Motor (Con. / 30min. Kw) | 3.7 / 5.5 | |
| AXIS SERVO MOTOR | ||
| Rapid Feed Rate (X/Y/Z m/min) | 36 / 36 / 36 | |
| Feed Rate (X/Y/Z m/min) | 20000 | |
| Power X/Y/Z (Kw) Mitsubishi | 1.5 / 1.5 / 2.0 | 1.5 / 1.5 / 2.0 |
| Torque X/Y/Z (Nm) Mitsubishi | 4.8 / 4.8 / 6.4 | 4.8 / 4.8 / 6.4 |
| ATC | ||
| ATC Type | Disk | |
| Tool Selection (Bi-direction) | Arm Type | |
| Tool Storage Capacity (Pcs) | 20 | |
| Max. Tool Diameter (mm) | Ø75 | |
| Max. Tool Length (mm) | 150 | 200 |
| Max. Tool Weight (Kgs) | 4 | 7 |
| MISCELLANEOUS | ||
| Air Requirement (Kg/cm2) | 6 | |
| Voltage (V) | 220 | |
| Power Requirement (KVA) | 15 | |
| Coolant Tank Capacity (L) | 150 | |
| Machine Weight (Kgs) | 2800 | 3000 |
| Machine Height (mm) | 2815 | |
| Floor Space (LxW mm) | 1900 x 2250 | 2200 x 2380 |
