Phạm Lương
0942547456
| Thương hiệu |
| Item | Unit | NV-1280 |
|---|---|---|
| Travel | ||
| X axis travel | mm(in) | 1,280(50.3") |
| Y axis travel | mm(in) | 650(25.5") |
| Z axis travel | mm(in) | 630(24.8") |
| Distance from spindle nose to table surface | mm(in) | 100~730(3.9" ~ 28.7") |
| Distance from spindle center to column | mm(in) | 722(28.4") |
| Table | ||
| Table dimension | mm(in) | 1,380 × 650(54.3" x 25.5") |
| Max. loading weight | kg(lb) | 1,200(2,645) |
| T-slots (W x No. x P) | mm(in) | 18 x 5 x 100(0.7" x 5 x 3.9") |
| Spindle | ||
| Spindle speed(OPT) | rpm | 10,000(12,000 / 15,000) |
| Spindle motor | kW(HP) | 11 / 15(20HP) |
| Spindle taper | type | 7/24 taper No.40 |
| Automatic Tool Changer | ||
| ATC type | type | Arm type |
| Tool shank | type | BT-40 |
| Pull stud | type | P-40T (45°) |
| Tool storage capacity(OPT) | pcs. | 24(30 / 32 / 40) |
| Max. tool diameter | mm(in) | Ø80(Ø3.1") |
| Max. tool diameter (Adjacent empty) | mm(in) | Ø150(Ø5.9") |
| Max. tool length | mm(in) | 250(9.8") |
| Max. tool weight | kg(lb) | 7(15) |
| Tool change time (Tool to Tool) | sec. | 2.5 |
| Tool change time (Chip to Chip) | sec. | 7 |
| Feedrate | ||
| Rapid feedrate (X / Y / Z) | m(in)/min | 36 / 36 / 24 (1,417.3 / 1,417.3 / 994.8) |
| Cutting feedrate | mm(in)/min | 10,000(393.7) |
| Other | ||
| Floor plan (W × D) | mm(in) | 3,750 × 2,500(147" x 98") |
| Machine weight | kg(lb) | 8,500(18,739) |
| Max. machine hight | mm(in) | 2,800(110") |
| Air source | kg/cm2(PSI) | 6~8(85~113) |
| Power capacity | KVA | 25 |
Trung tâm gia công dọc NV-1280
